2HR Fire Rated
Accredited as a fire-rated product suitable for 120-minutes of fire protection.
Premium 2HR Fire Door
- 2 Hour Rated
- Standard Opening
The Premium 2HR fire door set is suitable for interior and sheltered exterior use. The door is available for pairing with both timber and steel frames. This door set offers the largest range of leaf facings, meeting stiles and hardware options within our range of 120 minute fire protection doors. Tested and accredited with meeting AS1905.1.2014 standard for fire resistance regulation.
This highly customisable door is offered with a selection of 6 facing option (MDF, Plywood, Acrovyn etc.), 3 frame options, and 9 glass options. Its suitability to construction needs is bolstered by a compatibility with timber, steel, and Korok walls. Further customisation includes the options for side lights and over lights, acoustic rating, and ventilation grilles.
Australian Standards
This product has been tested and accredited in accordance with Australian standards.
Extras
This product is available with a wide range of additional extras to suit specific project requirements.
Exterior Door
Compositional materials can permit exterior application of this door.
Product Options
Steel framed smoke control doors include the PFS-4 frame seal. If required, bottom seals can be selected from the Hardware List.
The thickness of the VP120 door leaf is 48mm with an approximate leaf weight of 27kg/m2
Wall Type Fire Resistance Rating
Stability/Integrity/InsulationDoor Application Max Leaf
Height (mm)Max Leaf
Width (mm)Steel Stud Wall
Timber Stud Wall
Masonry Wall-/120/30sm Single 2700 1500 Pair 2700 1350 Korok / Speedpanel -/120/30sm Single & Pair 2400 1200 2700 1050 Notes:
- Please note that the maximum leaf width shown above is measured per door leaf.
- The ‘sm’ above denotes that the door is available as a smoke control door set.
- Insulation ratings must be notified at time of pricing for steel frames. Maximum insulation ratings shown. Some wall applications will have a maximum 30 minute insulation rating.
- Door sets with leafs larger than 2700 x 1200 are not intended for frequent use, we recommend they be typically either held open or closed with compliant hardware in normal operation.
- Minimum width for a fire door leaf is governed by the need to fit a compliant closer. Typically, 400 mm is the practical minimum.
Wall Types
Jambs may be connected to:
- Precast concrete (120mm thickness minimum) or grouted blockwork (140mm thickness minimum).
- Timber or steel stud plasterboard walls of FRR -/120/120 or above.
- Speedpanel & Korok walls (64mm or 78mm). Restrictions apply, see installation details for more information.
Leaf Facings
- Plywood
- Steel sheet, mild or stainless (0.6 – 1.0mm)
- Versilux
- Sheet vinyl (1.25 – 2mm)
- Acrovyn 4000*
- Korogard *
- Decorative Timber Mouldings/panels
- Aluminium sheet (0.3 – 1.0mm) *
Notes:
- Of the above facings only those marked * may extend around the door edge.
- Standard Paint Quality doors are allowed ‘non-clashed’ to provide best surface for finish painting.
- See Additional Door Options for more facing alternatives.
Leaf Edges
The leaf edges listed below are available for the VP120 door set
Paint quality doors are non-clashed as standard.
Meeting Stile
The meeting stiles listed below are applicable to paired door sets only.
Timber Frame
Timber frames are not applicable for fire doors above 60 minute fire rating.
Steel Frame
The steel frame profiles listed below are available for the VP120 door set.
Stainless steel frames are only approved grouted into masonry or concrete walls.
Standard frames are three-sided only with no sill. Four-sided frames and/or custom sills may be available on request. Timber sills are not available on fire doorsets.
Glazing Type Maximum Glazed Area Max Height (mm) Max Width (mm) Glazing Bead FRR with Vision Panel Timber Aluminum Up to 0.065m2 Over 0.065m2 Georgian Wired 0.065m2 305 850 √ -/120/60 n/a Robax 0.065m2 850 850 √ -/120/60 n/a Pyroceram 0.065m2 850 850 √ -/120/60 n/a Pyrodur 13* 0.065m2 850 850 √ -/120/60 n/a Note
- Please note that the height and width of the vision panel must still fall within the maximum glazed area.
- Glazing types marked with * indicate Grade A Safety glass.
Standard Vision Panel Cross Sections
Timber Bead* Aluminium Bead Not applicable for this door set Acoustical performance
An acoustic rating of STC 31 (Rw 32) is available for ply / MDF faced doors and STC 36 (Rw 38) for steel face doors.
If an acoustic rating is required this has to be specified at time of order and will come with restrictions around seals and vision panels.
Thermal insulation
This door leaf has a thermal insulation rating (R-value) of 0.692 Km2/W.
Plywood or MDF faces: Rw 32 / STC 31:
Steel faces: Rw 38 / STC 36:
Product Optional Extras
Push or Kickplates
Push plates or kickplates can be of the below permitted materials. Fixing may be via screws or contact adhesive only.
- Steel mild or stainless (0.6 – 0.9mm)
- Acrovyn 4000 (0.7 -2.0mm)
Ventilation Grilles
Lorient LVH intumescent grilles are available in the following sizes:
- 300 x 300 mm
- 450 x 450 mm
- 600 x 300 mm
- 600 x 600 mm
Please note that fire doors with ventilation grilles cannot be certified as ‘Smoke control' door sets.
Two such Intumescent grilles may be fitted to each leaf separated from each other and hardware by at least 300mm (only one 600 x 600 mm grille allowed per leaf).
Fire rating is limited to -/120/30. Grilles in exterior doors require an additional, custom made cover plate.
Drop shutter grilles are not an option on this doorset.
Adjacent Doors
Adjacent fire rated doors are permitted provided the central mullion is grouted, reinforced steel. Maximum leaf width is 1200 mm. Maximum width of the coupled doorsets is 7500mm overall (max. 3 pair doorsets in a sequence).
Adjacent doors are not permitted for fire rated door sets installed into Speedwall.
Restaurant function
A door set can be supplied with a modified frame (timber or steel) allowing two door leaves to open in opposite directions. Maximum door height is 2400mm.
Restaurant function door sets are not permitted installed into Speedwall or James Hardie wall.
V-Grooves
V-grooves can be machined into the leaf facings for aesthetic purposes.
The following restrictions apply:
- Leaf facing has to be MDF or ply.
Decorative panels
Decorative panels (stone, glass, MDF, plasterboard, hardboard or greenboard) can be added to one face of the door leaf provided:
• Panel is glue fixed (no screws or nails)
• Additional weight is less than 20 kg per hinge
• Leaf dimensions are 2400 x 1020 or less
• Leaf is hung in a steel framePanels to be installed on site by others. They can be either glued directly to the face of the leaf or onto timber battens glued to the leaf.
If the decorative panel is on the hinge face of the leaf, please specify extended "wide throw" hinges.
Decorative panels on push face of leaf may not extend under the frame stop.
Please note that special hardware items may be required (e.g. extended spindles).
Decorative panels are not allowed in conjunction with vision panels.Overpanel With Transom Elevations in Steel Frame
Overpanels with transom are available in steel jambs to an overall height of 3860mm. This is available for single or paired door sets.
Transomless overpanels are not available on this doorset.
A complete door set with screw fixed side panels can be supplied, with the steel mullion between panel and door leaf to be grout-filled during installation.
Overpanels are not permitted for fire rated door sets installed into Korok / Speedwall.
Steel Transom Overpanel Detail
Sidelights and overlights are not applicable for this door set.
Similar products
Internal 2HR Fire Door
A 2 hour fire door fit for internal application.2HR Fire-Rated Acoustic Door
The door for acoustic attenuation between spaces paired with a 2 Hour Fire Rating.Premium 1HR Fire Door
A highly customisable 1 Hour Fire-Rated door manufactured to be robust and versatile in application.- Door Frames
Fire-Rated Metal Frames
Specially designed fire-rated door frames that work in conjunction with fire-rated doors to create a complete fire-resistant barrier.
